Important Use and Safety Instructions:
Franciscan Brown may be used on interior or exterior surfaces such as metal, wrought Iron, Cement Statuary, stone, wood, pottery, glass, etc.
Surfaces must be firm and clean, and dry. Wax and grease must be removed by washing surface with paint thiner, Varsol or mineral spirits. Bush should be removed with a wire brush or sandpaper as close to bright metal as possible.
Brush or spray two coats “Franciscan Brown” on properly prepared surface allowing at least 12 hours drying between coats. After the last coat has dried at least 12 ours proceed with application of “Verde Patina”.
Use paint thinner, Varsol, or mineral spirits for cleaning brushes and other equipment.
Contains Petroleum Distillate
If swallowed do not induce vomiting. CALL PHYSICIAN IMMEDIATELY, COMBUSTIBLE. Keep away from heat and open flame. Avoid prolonged contact with skin and breathing of vapor or spray mist.
Close container after use.
Use with adequate ventilation.